Click on link below to get list of files, then right-click and choose 'Save Target As...' to download.
Right-click on appropriate link below and choose 'Save Target As...' to download.
VCP.exe update for Alpha system (1427KB) VCP.exe and VCP.xml go in the customer's C:\PS\VCP directory and VCPversions.txt is just a list of changes/new features.
VCP.xml (1KB)
VCPversions.txt (6KB)
CalEntry program v2.0.10 (352KB) ...Latest version (not yet checked, suggested filename back to 1C, 1T etc.)
CalEntry program v2.0.8 (352KB) ...Latest checked version (Piston Position set to N/A, multiple NI boxes)
CalEntry program v2.0.7 (352KB) ...Previous version (4 d.p. for NI USB, multiple NI boxes)
CalEntry program v1.7 (312KB) ...Latest version for Serial box (not for NI USB box)
Block Run program v6.0.15 (1012KB) ...Latest version (For Flex)
Compaction Run program v2.8.18 (972KB) ...Latest version (mods to fix/check problem with occasional Error 380 at 1100)
Compaction Analysis v2.4.4 (1264KB) ...Latest version (mods to fix problem with Peak stats if tablets aborted)
----------------------------------------------------------------------
LCF v6.2.4 (964KB) ......Latest LCF for 1000000 cycles fix
----------------------------------------------------------------------
msvcr71.dll - goes in Windows\System32 folder (340KB) ......part of the NET framework which should get updated by Windows
VCP v2.4.9 (1512KB) ......Including link to HelpDesk.exe (must be used with Data Manager v2.2.6 or later)
Helpdesk.exe (1893KB) .......for use with VCP v2.4.7 or later (Copy to same folder as VCP)
Older
VCP v2.4.6 (1504KB) ......Fix for graphing problem with updated XP (must be used with new Data Manager)
----------------------
New Damper Block Run with fix for incorrect Rebound values under graphs
(03/03/08 - 12.01 pm) v6.0.10
Download this and copy
over the existing 1602RUN (.exe) file in the "C:\PS\BlockRun" folder
Block Run v6.0.10 (996 KB)
----------------------------------------------------------------------
Damper and Spring Block Run with large text and offset spring load
(for
both machines - rename to 1510run.exe for Spring) (26/02/08 - 4.40 pm) v6.0.9
Block Run v6.0.9 (996 KB)
Newer Damper Editor to fix printing problem (for both machines - rename to
1510edit.exe for Spring)
(26/02/08 - 2.20 pm) v6.0.3
Block Editor v6.0.3 (500 KB)
Newer Fracture Analysis v1.14
(Needs renaming
from XXXXFRAN.EXE to take account of the Job
Number.)
Fracture Analysis v1.14 (692 KB)
Newer Tensile to look in the parent folder to get the existing keycode
(so should now run when
copied over the old one)...
Tensile Test v6.1 (844 KB)
Victrex's (1207) version 6
Tensile Test v6.0 (844 KB) .... Copes with um
Needs renaming from XXXXTENS.EXE to
take account of the Job Number.
Should be able to
overwrite the older version in the ESH folder.
Default paths are;
DEFS.INI file in the application's parent
folder.
C:\PS\VCP folder to start VCP
from.
----------------------------
Latest....
Compaction
Run v2.8.17 (968KB) ......Removed LVDT range change
in Punch Deformation Determination routine to avoid
shift in LVDT
zero.
Bug fix - removed change into LVDT mode towards the end of the Punch
Deformation routine after actuators have been moved
almost to end of Stroke
range in Stroke control.
Compaction
Run v2.8.16 (968KB) ......Punch Clash allowed if
flag in COMP.INI file set to -1 (see e.g. lower down).
Display of Min Punch
separation cell set to have red background if punches clash.
Warm up
re-instated.
Compaction Analysis v2.4.3 (1264KB) ......Type mismatch fix
Profile Builder v2.6.0 (296KB) ......Minor improvements
VCP v2.4.6 (1504KB) ......Fix for graphing problem with updated XP (must be used with new Data Manager)
Data Manager v2.2.6 (268KB) ......Fix for graphing problem with updated XP (must be used with new VCP)
----------------------------
Compaction
Run v2.8.14 (956KB) ......More delay added before
starting second VCP
More delay added before engaging external input to allow
high pressure to stabilize
Suck Rate checked before use to be at least 0.1
mm/sec
'Lower Integrator ON' message bug fixed
Compaction Run v2.8.11 (964KB) ......Extra delay before each tablet
Compaction Run v2.8.10 (964KB) ......Latest standard program
Compaction Run v2.8.6 (960 KB) ......Feedback updates now back to normal speed on LVDT setup screen
Trial....
Compaction Run v2.9.1 (964KB) ......NO WARM UP ALLOWED. Oscillates after auto-bias for 4 secs with parameters you set beforehand in VCP. DITHER NOT CHANGED THROUGHOUT
Trial....
Compaction Run v2.9.0 (964KB) ......DITHER NOT CHANGED THROUGHOUT
---------------------------
(You should already have the following OCX installed since 2.05
works...)
PSDAP.OCX
(124 KB) ..... Save in 'Windows\System32' folder and then
'Run...' regsvr32 psdap.ocx
PSDAP302.OCX (124 KB) ..... Save in 'Windows\System32' folder and then 'Run...' regsvr32 psdap302.ocx
Compaction Run v2.05 (936KB) ... Older standard version
Compaction Analysis v2.03 (1.248 KB) ... Older standard version
Compaction
Run v2.8.5 (960KB)
Compaction Run v2.8.4 (960KB)
Compaction Analysis v2.4.0 (1.252 MB)
Example of PILRANGE.INI (2 KB)
----------------------------
----------------------------
Example of LOADGAIN.INI in C:\PS\CompRun
Default Load gain is 0.1kN
Example of SLIP.INI in C:\PS or C:\PS\Profile or C:\PS\CompRun
Example of PILRANGE.INI in C:\PS or PS\CompRun
Example of PROFILE.INI in C:\PS or C:\PS\Profile or C:\PS\CompRun
Example of INTEGRAT.INI in PS\CompRun
Example of COMP.INI in C:\PS or PS\CompRun
Default Upper Bias Shift is 20
Default Lower Bias Shift is 20
Default Stirrer Enabled is 0 (False) 1 is True
Example of LASTRUN.INI in PS\CompRun
Example of LASTAUTO.INI in PS\CompRun
Example of COMPRUNPATHS.INI in PS\CompRun
COMPRUNPATHS.INI can be used to re-define results folder path, etc.
Timemark used in the DAP Server..... TIMEMARK.INI in C:\PS
Default values
NumPointsInTimingMark% =
10
TimingPeakAtPoint% = 7
NumExtraPointsEitherSide% = 2
TimingRecoveryThreshold% = 10
SlowTimingMarkHeight% = 500
FastTimingMarkHeight% = 1500
NumQuietPointsInAverage% = 5
ForceTimingDiagnostics% = False