50  = UpperStrokeRanges(1)
50  = UpperStrokeRanges(2)
50  = UpperStrokeRanges(3)
50  = UpperStrokeRanges(4)
25  = UpperLVDTRanges(1)
10  = UpperLVDTRanges(2)
5   = UpperLVDTRanges(3)
2.5 = UpperLVDTRanges(4)
50  = UpperLoad1Ranges(1)
20  = UpperLoad1Ranges(2)
10  = UpperLoad1Ranges(3)
5   = UpperLoad1Ranges(4)
50  = LowerStrokeRanges(1)
50  = LowerStrokeRanges(2)
50  = LowerStrokeRanges(3)
50  = LowerStrokeRanges(4)
25  = LowerLVDTRanges(1)
10  = LowerLVDTRanges(2)
5   = LowerLVDTRanges(3)
2.5 = LowerLVDTRanges(4)
50  = LowerLoad1Ranges(1)
20  = LowerLoad1Ranges(2)
10  = LowerLoad1Ranges(3)
5   = LowerLoad1Ranges(4)
0.01 = PushOffLoadRanges(1)
0.01 = PushOffLoadRanges(2)
0.01 = PushOffLoadRanges(3)
0.01 = PushOffLoadRanges(4)
5    = EjectionLoadRanges(1)
5    = EjectionLoadRanges(2)
5    = EjectionLoadRanges(3)
5    = EjectionLoadRanges(4)
1 hopper fitted
0    = fill depths for layers (-1 = True 0 = False)
a    = letter stamped in test references (a = first machine, b second, c third etc)
0    = allow post test additional comments to be entered (-1 = True 0 = False)
Additional LVDT No. 1 [mm] <-- Free1 channel label (up to 26 chars used)
Additional LVDT No. 2 [mm] <-- Free2 channel label
Free3 [V] <-- Free3 channel label
Free4 [V] <-- Free4 channel label
Free5 [V] <-- Free5 channel label
Free6 [V] <-- Free6 channel label
Free7 [V] <-- Free7 channel label
Free8 [V] <-- Free8 channel label
Free9 [V] <-- Free9 channel label
Free10 [V] <-- Free10 channel label
2    = stirrer fitted to hopper number
-1    = PushOff load cell fitted (-1 = True 0 = False)
0   = Clamping available (-1 = True 0 = False)
0   = Free1 channel value for -5 volts
-15 = Free1 channel value for +5 volts
no invert
0   = Free2 channel value for -5 volts
-15 = Free2 channel value for +5 volts
no invert